Tested VST Plug-ins
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Tested VST Plug-ins
-
In order to fully test a VST plug-In, please follow these steps and report back here.
Firstly please try and get these informations.
1) Plugin Name & Manufacturer
2) Plugin version: Which version? Full version or demo version?
3) OS version: what is your operating system?
At this point you may want to uninstall and then reinstall the Ohm Studio if you believe that the plug-in you're testing is not working properly.
See here for the uninstall procedure.
Removing the cache and preferences should be enough (step 1 and 2 on Mac, step 4 and 5 on Windows).
4) VST Scan: Does the initial scanning process make the ohm studio crash/freeze? Dou you see the VST plug-in in the Gear-List?
5) Instantiating the plugin. Does the plug-in make the Ohm Studio crash when you drag&drop it on the Gear Panel?
6) Audio. Does it make any sound (VST instruments)? Or does it process audio correctly (VST effects) ?
7) Changing presets/parameters. Does changing the preset (or any
parameters if the plugin doesn't have presets) on the plug-in's GUI
affect the sound?
8) Inspector. Can you control the plug-in's parameters from the Plugin Inspector?
9) Loading presets/parameters : If you change the plug-in's preset
(or any parameters if the plugin doesn't have presets), close the
project, then open it again, does the plug-in load the right preset or
does it load the default preset? In other words, does the plug-in
remember the changes you made last time you worked on that project?
Here is an example:
1) Alchemy Player - Camel Audio
2) Demo version - 1.20.1.P
3) Mac OS X 10.6.7
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project OK
Thank you for your time and cooperation.———————————
Quick summary of (y)our findings:
==================================
Windows
==================================
Pass
Absynth, Native Instruments - v 4.0.5.003 full
Aether, 2C Audio - v 1.5.1 full
Albino, LinPlug - 3.0.2 full
Arp2600, Arturia - v 2.0 full
Battery 3 Native Instruments - Full Version 3.2.2
BlueVerb DRV-2080, Nomad Factory - v 1.7 full
BT Analog Chorus CH2S-3, Nomad Factory- v 3.6 full
BT Analog Phaser APH-2S, Nomad Factory - v 3.6 full
BT BrickWall BW2S-3, Nomad Factory - v 3.6 full
BT Equalizer GEQ12-3, Nomad Factory - v 3.6 full
BT Equalizer PEQ2B-3, Nomad Factory - v 3.6 full
BT Equalizer PEQ5B-3, Nomad Factory - v 3.6 full
CamelPhat, Camel Audio - v 3.15 full
CS-80V, Arturia - v 2.0 full
Delta III, LinPlug - v 3.05 full
EQ 9063B All-Tech, Nomad Factory - v 1.1 full
FL Studio, Image Line - v 10.0.2 full
Jupiter-8V, Arturia - v 2.0 full
LM Amplifier LM-662, Nomad Factory - v 1.6 full
Midnight Compressor / Midnight EQ, Focusrite - v 1.1 full
Moog Modular V2, Arturia - v 2.5 full
Nexus, reFX - v 2.2.0 full
Prophet-V, Arturia - v 2.0 full
Sandra, FSynthz.com - ?? full
Vanguard, reFX - v 1.8.0 full
z3ta+, RGC Audio - v 1.1 full
Fail
A.M.T. Amp Leveling, Nomad Factory - v 1.3 full
A.M.T. Max Warm, Nomad Factory - v 1.3 full
A.M.T. Multi Max, Nomad Factory - v 1.3 full
Alchemy Player - Camel Audio - Player version - 1.20.1P (32 Bit VST)
British MCL-2269, Nomad Factory - v 1.2 full
British NEQ-1972, Nomad Factory - v 1.2 full
BT Analog TrackBox, Nomad Factory - v 3.6 full
BT Equalizer PEQ322-3, Nomad Factory - v 3.6 full
BT Compressor CP2S-3, Nomad Factory - v 3.6 full
BT Compressor FA770-3, Nomad Factory - v 3.6 full
BT DeEsser DS2S-3, Nomad Factory - v 3.6 full
GURU / FXpansion (Freebie included with Computer Music Mag)
impOSCar, GForce - v 1.0.1 full
Korg Legacy (Including Legacy and MS20/MS20fx; Polysix; Wavestation) - ver 1.x
Mach Five 2.02 Motu
Melda Plugins - Melda Production - Melda Total Bundle 5.02 (32 Bit VST)
Melda Plugins - Melda Production - MDrummer Small 4.00 (32 Bit VST)
Pro-53, Native Instruments - v 3.00.013 full
Pro-52, Native Instruments - v 2.5.0 full
Akoustik Piano, Native Instruments - v 1.1.3.001 full
B4 II, Native Instruments - v 2.0.4.001 full
Battery, Native Instruments - v 3.2.2 full
Brass, Arturia - v 2.0.5 full
ECHOS, Nomad Factory - v 1.0 full
Glitch, dBlue - v 1.3.05 full
Grossbeat, Image Line - v 1.0.7 full
Guitar Rig 3, Native Instruments - v 3.1.0.005 full
Harmless, Image Line - v 1.0.8 full
Kontakt, Native Instruments - v 4.2.3 full
MAGNETIC, Nomad Factory - v 1.4.1 full
Massive, Native Instruments - v 1.2.1 full
Maximus, Image Line - v 1.0.9 full
Minimoog-V2, Arturia - v 2.0.1 full
Morphine, Image Line - v 1.5.4 full
Nectar, iZotope - v 1.1.0 full
Sytrus, Image Line - v 2.6.12 full
Superior Drummer 2.0 - Toontack - Full version - 2
Toxic Biohazard, Image Line - v 1.1.4 full
Valhalla Room, Valhalla DSP - v 1.0.7 full
Yellow Tools Independence Free - ver 2.5
Suspicious
Dimension Pro - Cakewalk
Play engine (Fab Four/Ministry of Rock/Gypsy/Goliath/EWSO/SD2 -East/West
==================================
Mac
==================================
Pass
Alchemy Player - Camel Audio
Kore2 / Kore2 Player - Native Instruments - Full Versions 2.1.2
Fail
Suspicious
-
Mach Five 2.02 MotuWin 7 64 (32 vst)Failed on Scan (VST 5.1 version) C++ runtime error R6016 'not enough space for thread data' continually loopedNeed to delete the both client and host processesOn the surface this looks like a 64bit into 32 bit error, so I'll check and reinstall M5 to make sure I got the 32 bit version installed
-
1. Kore2 / Kore2 Player - Native Instruments
2. Full Versions 2.1.2
3. OS X 10.6.8
4. VST Scan OK
5. Instantiating OK
6. Audio OK
7. Preset Change OK
8. Inspector OK
9. Re-loading project OK
-
GURU / FXpansion (Freebie included with Computer Music Mag)Win7 64 (32 bit plug)Scan OKInstant OKAudio OKPreset Change OKInspector OKReloading Project - does not retain settings and reverts to default
-
1) Alchemy Player - Camel Audio
2) Player version - 1.20.1P (32 Bit VST)
3) Win 7 (64 Bit)
4) VST scan, OK
5) Instantiating, OK
6) Audio, OK
7) Preset change, OK
8) Inspector, OK
9) Re-loading project, NOT OK - does not retain settings and reverts to default -
1) MELDA PLUGINS - MELDA PRODUCTION
2) MELDA TOTAL BUNDLE 5.02 (32 Bit VST)3) Win 7 (64 Bit)
4) VST scan, OK
5) Instantiating, OK
6) Audio, OK
7) Preset change, OK
8) Inspector, OK
9) Re-loading project, NOT OK - does remember changes on the default preset but doesn´t remember presets or changes on presets. -
1) MELDA PLUGINS - MELDA PRODUCTION
2) MDRUMMER SMALL 4.00 (32 Bit VST)3) Win 7 (64 Bit)
4) VST scan, OK
5) Instantiating, OK
6) Audio, OK
7) Preset change, OK
8) Inspector, OK
9) Re-loading project, NOT OK - goes back to default.10) The next second after recording (when you hit stop), spontaneously delete the recordings. -
Good:
1. Albino, LinPlug
2. v 3.0.2 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Absynth, Native Instruments
2. v 4.0.5.003 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Arp2600, Arturia
2. v 2.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. CS-80V, Arturia
2. v 2.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. CamelPhat, Camel Audio
2. v 3.15 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Jupiter-8V, Arturia
2. v 2.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Midnight Compressor / Midnight EQ, Focusrite
2. v 1.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Parameter change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Sandra, FSynthz.com
2. ?? full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Parameter change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Nexus, reFX
2. v 2.2.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Vanguard, reFX
2. v 1.8.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Prophet-V, Arturia
2. v 2.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Moog Modular V2, Arturia
2. v 2.5 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Can control parameters from Inspector, but cannot establish connections between parameters (oscillators/filters/envelopes/etc.)
9. Re-loading project - OK
1. z3ta+, RGC Audio
2. v 1.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. FL Studio, Image Line
2. v 10.0.2 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK - Works correctly as a vst/rewire plugin
7. not applicable
8. Can control several overall parameters from Inspector
9. Re-loading project - OK
______________________
Issues:
1. impOSCar, GForce
2. v 1.0.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Presets work on initial load
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs remained where they were when closed, but all presets are absent from the instanced plug-in. Tested without tweaking from preset, and also had all presets disappear.
1. Pro-53, Native Instruments
2. v 3.00.013 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, but all presets are still available.
1. Pro-52, Native Instruments
2. v 2.5.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, but all presets are still available.
1. Akoustik Piano, Native Instruments
2. v 1.1.3.001 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Presets work on initial load
8. Can control some basic parameters from Inspector but not all
9. Upon closing/reopening, all tweaks/knobs were reset, the previous preset was not loaded, and all presets are available.
1. B4 II, Native Instruments
2. v 2.0.4.001 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, loads the last preset without adjustments, and all presets are still available.
1. Battery, Native Instruments
2. v 3.2.2 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK - Will load kits
8. Can control some basic parameters from Inspector, but no midi cc control
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, loads the last kit sans any previous adjustments, and all kits are still available.
1. Brass, Arturia
2. v 2.0.5 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK - Loads kits and individual instruments
8. Can control parameters through Inspector - however most control is based off of velocity so Inspector is not useful for this plugin. Turning any of the parameters to zero creates a c# error and crashes the vst
9. Upon closing/reopening, all tweaks/knobs were reset, the previous preset was not loaded, and all presets are available.
1. Grossbeat, Image Line
2. v 1.0.7 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Can control slot selection through Inspector
9. Upon closing/reopening, all tweaks/knobs were reset, the previous preset was not loaded, and all presets are available.
1. Harmless, Image Line
2. v 1.0.8 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Can control slot selection through Inspector
9. Upon closing/reopening, all tweaks/knobs were reset, goes to default - the previous preset was not loaded, and all presets are available.
1. Maximus, Image Line
2. v 1.0.9 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs were reset, the previous preset was not loaded, and all presets are available.
1. Kontakt, Native Instruments
2. v 4.2.3 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK - Will load instruments etc.
8. Can control some basic parameters from Inspector, but no midi cc control
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, loads the last instrument used without any adjustments, and all instruments are still available.
1. Guitar Rig 3, Native Instruments
2. v 3.1.0.005 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset Load - OK - Will load instruments etc.
8. Inspector - Only some parameters can be controlled through the Inspector
9. Reloading project - OK - Upon closing/reopening, all tweaks/knob positions were where they were when closed, loads the last instrument used without any adjustments, and all instruments are still available.
1. Massive, Native Instruments
2. v 1.2.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK - Will load instruments etc.
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knob positions were kept until the vst was opened - it then reverted to the preset that was altered, and all presets are still available.
1. Sytrus, Image Line
2. v 2.6.12 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs were reset, goes to default - the previous preset was not loaded, and all presets are available.
1. Glitch, dBlue
2. v 1.3.05 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Parameter change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs were reset, goes to default
1. Toxic Biohazard, Image Line
2. v 1.1.4 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs were reset, goes to default -
the previous preset was not loaded, and all presets are available.
1. Morphine, Image Line
2. v 1.5.4 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knobs were reset, goes to default -
the previous preset was not loaded, and all presets are available.
1. Minimoog-V2, Arturia
2. v 2.0.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Upon closing/reopening, all tweaks/knob positions were lost where they were when closed, loads the last preset without adjustments, and all presets are still available.
-
Wow, thanks dudes!
-
Good:
1. Aether, 2C Audio
2. v 1.5.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BlueVerb DRV-2080, Nomad Factory
2. v 1.7 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT Analog Chorus CH2S-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. Delta III, LinPlug
2. v 3.05 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT Equalizer PEQ2B-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT Equalizer GEQ12-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT Equalizer PEQ5B-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT Analog Phaser APH-2S, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. BT BrickWall BW2S-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. EQ 9063B All-Tech, Nomad Factory
2. v 1.1 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
1. LM Amplifier LM-662, Nomad Factory
2. v 1.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - OK
__________________________
Issues:
1. BT Analog TrackBox, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - Meter in/out is set as off/on, but that has no audio effect
9. Re-loading project - OK
1. BT Equalizer PEQ322-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - Meter in/out is set as off/on, but that has no audio effect
9. Re-loading project - OK
1. A.M.T. Amp Leveling, Nomad Factory
2. v 1.3 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - but Power switch (off/on) is backwards in Inspector
9. Re-loading project - OK
1. A.M.T. Max Warm, Nomad Factory
2. v 1.3 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - but Power switch (off/on) is backwards in Inspector
9. Re-loading project - OK
1. A.M.T. Multi Max, Nomad Factory
2. v 1.3 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - but Power switch (off/on) is backwards in Inspector
9. Re-loading project - OK
1. British MCL-2269, Nomad Factory
2. v 1.2 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - but Power and Vintage switches (off/on) are backwards in Inspector
9. Re-loading project - OK
1. British NEQ-1972, Nomad Factory
2. v 1.2 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - but Power and Phase switches (off/on) are backwards in Inspector
9. Re-loading project - OK
1. BT Compressor CP2S-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - Mode should be RMS/Peak instead of off/on
9. Re-loading project - OK
1. BT Compressor FA770-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - Attack Mode should be A/B instead of off/on
9. Re-loading project - OK
1. BT DeEsser DS2S-3, Nomad Factory
2. v 3.6 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK - Filter Mode should be HPF/BPF instead of off/on
9. Re-loading project - OK
1. Valhalla Room, Valhalla DSP
2. v 1.0.7 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - plugin is reset to default
1. Nectar, iZotope
2. v 1.1.0 full
3. Windows 7 64-bit
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - plugin is reset to default
1. ECHOS, Nomad Factory
2. v 1.0 full
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - plugin is reset to default
1. MAGNETIC, Nomad Factory
2. v 1.4.1 full
4. VST scan - OK
5. Instantiating - OK
6. Audio - OK
7. Preset change - OK
8. Inspector - OK
9. Re-loading project - plugin is reset to default -
any chance an Ohmie can put the tested plugins (passed and failed) in the first comment so we don't duplicate.thx
-
1) FLStudio , Image Line
2) 10.05 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio NOT OK - if bounced online
7) Preset change OK
8) Inspector OK
9) Re-loading project OK
FLStudio is working as plugin (not rewire), thats perfect for me. There are some problems when i bounce it online (collaborative freeze).
:
-Flstudio will get closed , and everything begins to get a bit choppy, however i managed to cancel it after spamming the buttons. Actually you have to do this or the file will not get bounced.
-there are some sounds/notes missing ( not the usual first note drop out wich FL has as plugin )
-timestretching in FL wont be adopted
Offline everything seem to work.
1) Sylenth1 , Lennardigital
2) 2.21 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project OK
1) Twin 2 , Fabfilter
2) 2.11 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project NOT OK - all settings will restore correctly but the preset name is gone, sometimes it doesnt load the previous settings
1) One , Fabfilter
2) 3.10 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project NOT OK - all settings will restore correctly but the preset name is gone, sometimes it doesnt load the previous settings
1) Volcano 2 , Fabfilter
2) 2.10 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project NOT OK - all settings will restore correctly but the preset name is gone
1) Timeless 2 , Fabfilter
2) 2.10 full
3) Win 7 64bit
4) VST scan OK.
5) Instantiating OK
6) Audio OK
7) Preset change OK
8) Inspector OK
9) Re-loading project NOT OK - all settings will restore correctly but the preset name is gone
-
1) Bitcrusher - CMT (free distortion/downsamlping effect)
2) Full Version 1.01
3) Windows 7 64-bit
4) VST scan - OK
5) Instantiating - OK
6) Audio - OK
7) Presets - OK (no presets to begin with)
8) Inspector - OK
9) Re-loading project - OK -
DUNE1) Synapse Audio Dune2) Full Version 1.43) Windows 7 64-bit4) VST scan - OK5) Instantiating -OK6) Audio - OK7) Presets - OK8) Inspector - OK9) Reloading project - OKNERVE1) Xfer Records Nerve2) Full Version 1.0.1 beta build 503) Windows 7 64-bit4) VST scan - OK5) Instantiating -OK6) Audio - OK7) Presets - OK8) Inspector - OK9) Reloading project - OK
-
Thank you guys!
